|
Series 910 Minifold - Introduction
HNL's most popular stainless steel minifold!
The standard Series 910 Minifold comprises of 4, 6 or 10 stainless steel ball valves fitted to a stainless steel manifold
with tapped inlet connections at both ends. Typically one inlet is used for the supply and the other is plugged, or fitted with a drain valve.
Alternatively the 4, 6 or 10 way units can be connected in series
using a barrel-nipple if more outlets are required (i.e. 8, 12, 20 etc.).
Ball valves may be standard, back-venting, locking, or back-venting and locking.
Back-venting valves allow automatic back-venting of the output pressure to atmosphere on valve closure. This safety feature
prevents accidents that may result from pressure locked-in the outlet line when the valve is closed.
Locking valves allow the valve to be secured in either the fully open or fully closed positions with a padlock. This safety feature
prevents system failure or accidents that may result from the operation of a valve that must be kept open or closed.
Ball valves are available with either 1/4" or 1/2" BSP.T or NPT outlet connections.
Manifolds are available with either 1/2" or 3/4" BSP.T or NPT inlet connections.
Accessories include inlet flanges, isolating valves, drain valves or blanking plugs.
The technical data sheet for the Series 910 Minifold - TD900 MBV - can be downloaded via the 'Drawings & Data' button on the left of this page.
|
|
|
